Foh Hup Industries Sdn Bhd
59, Jalan Haji Manan,
86000 Kluang,
Johor, Malaysia.
+607-7724184
+607-7734979
+607-7722018

Recent Updates

Foh Hup Industries Sdn Bhd added 18 new photos in Pesticide / Weedicide Sprayers Accessories
May 18, 2022 at 03:57 pm —
Foh Hup Industries Sdn Bhd added 2 new photos in Pesticide / Weedicide Sprayers
Dec 14, 2018 at 10:20 pm —
Hand Sprayer 2Litre
Hand Sprayer 6 Litre
Foh Hup Industries Sdn Bhd updated NEWPAGES Profile
Mar 6, 2017 at 06:40 pm —
Foh Hup Industries Sdn Bhd updated NEWPAGES Profile
Mar 6, 2017 at 06:40 pm —
Foh Hup Industries Sdn Bhd added new photo in Pesticide / Weedicide Sprayers
Feb 28, 2017 at 02:57 pm —
Foh Hup Industries Sdn Bhd added new photo in Pesticide / Weedicide Sprayers Accessories
Feb 27, 2017 at 12:26 pm —
Pesticide / Weedicide Sprayers Accessories

Pesticide / Weedicide Sprayers Accessories

Part No. Description Part No. Description Part No. Description 8401S Screw 8420W Washer 8441 CPT Automatic Release CPT 8401N Nut 8421 Jam Nut 8441B Union 8401 Tank Body 8422 Nipple Body 8442 Pin 8301 Tank Body 8422CPT Nipple Body CPT 8443 Autorelease Lever 8301 Stand Guard 8422W Washer 8445W Washer 8405 Strainer 8424L Tube for Nipple 8446 Sprayer Lance 8407A Plastic Cover 8325 Air Cylinder 8447W Washer 8408 Hook 8425 Air Cylinder 8448A-1 Cap 8411 Shoulder Strap 8428 Pull bar 8448A-2 Nipple 8411CPT Shoulder Strap CPT 8429A Pin 8448A CPT Adjustable Cone Nozzle 8412P TRI-Gride SRG-32 8430 Nut 8448A-R O Ring 8413 Pump Handle CPT 8431 Brass Washer 8453 Union 8414 Milled Nut 8432 Piston 8454 Nipple 8415 Pump Cylinder 8433 Piston ROD 8455 PVC Hose 8415SH Holder 8433VC Brass Washer 8455CPT PVC Hose CPT 8415W Washer 8435 Plug 8455CR Clip 8417 Ball Bearing 8436W Washer 8458W Washer 8418 Valve Body 8437S Spring 8458F Filter 8418CPT Valve Body CPT 8440 Spindle 8459 Cleaning Chamber 8418W Washer 8440R O Ring 8470CPT Four Hole Nozzle CPT 8418B Screw 8441 Autorelease Body     Operating Instruction pfr Use Screw the Spraying Lance (No. 8446) into the automatic Release (No. 8441) and fix the Adjustable Nozzle (8488A-1) into the Sprayer Lance. Then fix the Pump Handle (No. 8413) to the pump shaft (either on right or left.) The sprayer is now ready for use by moving the Pump Handle upwards and downwards. Oil all moving parts regularly before use, including the inside of the Pump Cylinder (No. 8415) where the Piston (No. 8432) is situated with No. 30 cylinder oil (GREASE must not be used). Check and clean Ventilation holes on cover (No. 8408) These holes must not be blocked while the sprayer is in use. Pump some strokes with closed Automatic Release in order to bring the sprayer under pressure and thus spraying can be obtained by pressingthe Lever (No. 8443) downwards. The Automatic Release will shuts automatically by just releasing the lever. Operating Difficulties Remove and clean Nozzles and Vortex which may be obstructed. Unscrew the Air Cylinder and clean the Ball Bearing inside the Valve Body. Make sure that all the Washers are tightly screwed to prevent leakage. Precautions Chemicals containing Corrosive Acids or highly Concentrated Mercury Compound should not be used read more
next page

Switch to Mobile Version